At ProClean, we know what works!
That's why the centerpiece of our service equipment is the venerable Prochem Everest truck-mount. This industry workhorse has proven itself time and again over the years as a powerful and reliable power unit.
This machine is used for cleaning all flooring types (except natural wood & laminate). It is also utilized for upholstery, power washing, vehicle cleaning, and to extract water from flood situations.
​The 4-cylinder Nissan gasoline engine is the same unit that Nissan uses to power their forklifts.
Features:

• 4 engine speeds - can operate 2 tools simultaneously.
• 4 heat exchangers - 270 degree F max temp.
• Belt driven water pump with:
  • 4.5 gpm flow rate
  • 3000 psi max available pressure
• Belt driven vacuum blower - 15 in.Hg max vacuum
• Chemical injection system
• On-board water softner
• 100 gallon fresh water tank
• 100 gallon waste water tank

Tools:

• 6 jet & 6 vacuum port RotoVac PowerWand
• 8 jet RotoVac floor wand
• 3 jet Prochem stair wand
• 1 jet RotoVac upholstery tool
• 2 jet - high pressure Prochem spinner tool

---

For Air Duct & Dryer Vent cleaning, ProClean relies on the industry leader...Nikro.

Our truck-mounted compressor is a 29.5 cfm compressor powered by a 13 hp 2-stage Honda engine. It provides a constant 195 psi from a 30 gallon tank.
This provides the power to the flexible cleaning rods that loosen the internal soils and debris and push them towards the vacuum.

The vacuum unit is a Nikro EC5000. It features dual, backward inclined blower units capable of creating a 5000 cfm wind tunnel that pulls everything out of your ductwork and into its exclusive 3-stage filtration system which includes a final stage H.E.P.A. (High Efficiency Particulate Air) filter rated at 99.97% @ 0.3 micron particles and larger. This actually  exceeds OSHA, EPA, and NADCA Standards for cleaning the air of toxic and nuisance dust.

Contact ProClean for your free service consultation now!